Data Destruction Equipment and Data Destruction Services in UAE

With IT upgrades, there will inevitably be some data media left over that you will need to dispose of. These storage media may contain sensitive data such as personal information, organisational data, financial data, or even more sensitive information for government agencies, the military, and banks. All of this information must be irretrievably deleted. Simple deletion is not enough as the data can be easily recovered with data recovery software. There are essentially 3 kinds of processes for Permanent data erasure - degaussing, multi-pass data overwriting and physical destruction. We have all 3 types of equipment to help you erase data from your media safely and permanently

Recent Blogs related to Tape media physical storage

Degaussing vs shredding/des... Securing the destruction of data is essential to avoid potential data breaches from disposed media. Two pri... Mar 08, 2024(Akash Jain)
How to choose a Degausser -... The process of Media Sanitization involves permanently erasing all information on storage media, such as... Mar 30, 2023(Akash Jain)
Degausser Media Compatibili... If you have a mix of media, e.g. hard drives, tape media and flash, SSD, there is no SINGLE device that can... Sep 27, 2022(Akash Jain)
Data Sanitization : What an... Data Sanitization has gained more importance in the recent years due to the increasing cases of data thefts... Jan 21, 2020(Akash Jain)
Disk and Data Sanitization ... When you are  Disposing your old Hard drives, merely deleting or reformatting is not enough to sanitize  th... Jan 18, 2016(Akash Jain)

Magnetic Data Wiping devices - Hard drive Degaussers and Tape Degaussers in Dubai

Degaussers generate a high-intensity magnetic field that is used to irrevocably erase all data on your magnetic media, such as hard drives or magnetic tapes. The process by which your data is irrevocably erased is called media sanitization, and degaussing is one of the many ways to sanitise your media. What makes degaussers so popular is their ease of use.

Unlike the 7 writes for data sanitization, which take a lot of time, and physical destruction, which requires heavy and noisy hardware, degaussers are fast, silent and efficient. Degaussing works with all kinds of Hard drives . Weather the interface is SATA , SAS or IDE , hard drive can be degaussed. Form factors don't matter ( 2.5"/3.5"). If your hard drive fits the degaussing chamber, it can be degaussed. Driver carriers ( like the Dell/HP Caddies) have to be removed sometime on smaller degaussers who don't have enough space.

However, the disadvantage of a degausser is that you can only degauss magnetic media, i.e. hard discs and tapes. Degaussing has no effect on flash media such as flash drives and SSDs. The only way to clean such media is to either write to it in multiple passes or physically destroy it.
Pro-Devices ASM240/ASM240+ Degausser in UAE CALL FOR PRICE
The ProDevice ASM240/ASM240+ degausser is undoubtedly the most innovative device for the permanent and safe data removal from magnetic media. The easy to use and technologically advanced degausser is based on the best components and patented technologies. The process of designing, manufacturing and testing the degausser in our R&D center is based on restrictive guidelines and procedures that guarantee its highest quality. Unique functions and efficiency of operation make it the most rational choice among degaussers available on the market. The ProDevice ASM240 is ideal for enterprises that follow strict rules related to information security. ProDevice Mobile App. available and included to scan the serial number of the media and generate an automatic report. Why use our Degausser to Securely wipe data from your Storage media 100% efficiency – irreversibly erasing data from any magnetic carrier (magnetic field =  up to 22 000 Gauss, 2.2T). Cooperation with mobile devices – the degausser can be operated using an intuitive application. It is the only device in the world with such functionality.  Short time of data destruction from the carrier:  17 seconds (ASM240+) or 30 seconds (ASM240). Easy inventory of degaussed carriers – barcode reading facilitates device identification. Compliance with procedures – photographing the media from the degausser (ASM240+) and mobile application |(ASM240 and ASM240+) , recording a video of the data deletion process. User-friendly, automatic reporting of the entire degaussing process – the Mobile App report includes: execution date, information about the employee, serial numbers of deguaussed carriers, photos and videos documenting the demagnetization, classification, media type, result of the process. Innovative PPMS (Pre-Paid Management System) technology – the ability to program a specific number of information erasing cycles, after which the device is automatically blocked. Flexible network mode – the device can be connected to the Ethernet network. Dedicated software – to manage the device’s history and parameters.  Security mandates and standards  our Degaussers comply with PCI DSS (Payment Card Industry), Data Security Standard NIST (National Institute of Standards and Technology), Guidelines for Media; Sanitization: NIST SP 800-36 NIST SP 800-88 HIPAA (Health Insurance Portability and Accountability Act) PIPEDA (Personal Information Protection and Electronic Documents Act) HMG CESG IS5 Media you can securely erase with our Degausser HDDs: 2.5” and 3.5”. Any Interface - SAS or SATA. Caddy needs to be removed All kind of Data tape media: LTO, DLT, SDLT, DDS, DAT, AIT, Travan, SLR, QIC, 3592, 3590E, 3490E, 3480, 9840, 9940, T10K Others: floppy disks 3.5”, some audio and video cassettes Media you can not Erase Permanently with Degaussers Flash Media ( including USB Drives, Flash Drives, SSDs and memory Cards) can not be degaussed.  Specifications of our Degausser PRODEVICE ASM240 PRODEVICE ASM240+ Max. magnetic field 2.2T=22 000 Gauss 2.2T=22 000 Gauss Data removal cycle 30s / unit* 17s / unit* Charging time between two cycles 0s 0s Mobile App Yes Yes Barcode scanner and camera Yes Yes Built-in camera No Yes Reporting Yes Yes PPMS Technology Yes Yes Power supply 115V, 230V / 50Hz, 60Hz 115V, 230V / 50Hz, 60Hz Dimensions 465mm x 350mm x 325mm 465mm x 350mm x 325mm Maximum media size 150mm x 112mm x 25mm 150mm x 112mm x 25mm Weight 38kg 36g Shipping case (option) Yes Yes Warranty 2 years up to 5 years 2 years up to 5 years
ProDevices120 Degausser in UAE CALL FOR PRICE
ProDevice ASM120 is the first degausser in the world, operating on the basis of the innovative PPMS (Pre-Paid Management System) technology. It is a professional, technologically advanced device for deleting data from magnetic media. It was designed as a part of a cooperative program with the AGH University of Science and Technology, produced and tested in the ProDevice research and development center. The ProDevice ASM120 degausser meets the strictest safety standards and guidelines in the field of data destruction.ProDevice Mobile App. available and included to scan the serial number of the media and generate an automatic report. Major Features of Our Degausser Magnetic Field Strength of 11,000 Gauss ( 1.1T ) to permanently delete data from magnetic media Degauss hard drives with the caddy trays. Expand to  MaaS (Machine as a Service) services, provided in the pre-paid mode. Complies with Major security Mandates PPMS (Pre-Paid Management System) technology – ProDevice ASM120 is the only degausser on the market that enables programming a specific number of data erasing cycles, beyond which the device is automatically blocked. So you can rent it for a predefined number of erasures beyond which it won't erase. Automatic reporting –You can generate a transparent degaussing statement that can be downloaded to your computer as evidence of the data destruction process. Media you can securely erase with our Degausser HDDs: 2.5” and 3.5”. Any Interface - SAS or SATA. Caddy needs to be removed All kind of Data tape media: LTO, DLT, SDLT, DDS, DAT, AIT, Travan, SLR, QIC, 3592, 3590E, 3490E, 3480, 9840, 9940, T10K Others: floppy disks 3.5”, some audio and video cassettes Media you can not Erase Permanently with Degaussers Flash Media ( including USB Drives, Flash Drives, SSDs and memory Cards) can not be degaussed.  Security mandates and standards  our Degaussers comply with PCI DSS (Payment Card Industry), Data Security Standard NIST (National Institute of Standards and Technology), Guidelines for Media; Sanitization: NIST SP 800-36 NIST SP 800-88 HIPAA (Health Insurance Portability and Accountability Act) PIPEDA (Personal Information Protection and Electronic Documents Act) HMG CESG IS5 Specifications of our Degaussers for Secure data Erasure PRODEVICE ASM120 BASIC PRODEVICE ASM120 PROFESSIONAL Max. magnetic field 1.1T=11 000 Gauss 1.1T = 11 000 Gauss Data removal cycle 30s / unit* 30s / unit* PPMS technology No Yes Reporting No Yes TCP / IP interface No Yes Power supply 115V, 230V / 50Hz, 60Hz 115V, 230V / 50Hz, 60Hz Dimensions H. 221mm x W. 465mm x D. 350mm H. 221mm x W. 465mm x D. 350mm Dimensions of the data media drawer 255mm x 120mm x 45mm 255mm x 120mm x 45mm Weight 33.5kg 33.5kg Shipping case (option) Yes Yes Warranty 2 years up to 5 years 2 years up to 5 years
HD-2X Ironclad - Degauss and Verify AED 36,750.00

Pre-Order
Based on Best selling HD2E Scans media serial numbers with included bar-code scanner Generates IRONCLAD erasure report including hi-res image of degaussed media -- Erasure Verification with JPG Image Capture The economical HD-2X IRONCLAD with 10,000+ gauss is a product of Garners dedication to innovation. Fully integrated with the Garner HD-2X degausser, the IRONCLAD scans the hard drive serial number, erases the hard drive, captures a JPG image of the degaussed hard drive, records the operator ID, witness ID, and documents the erasure status of the degaussed hard drives. This essential information is then preserved in an IRONCLAD erasure verification report creating a complete proof-of-erasure file. HD-2X IRONCLAD- Secure Image Capture System Records JPG images of degaussed hard drives and tapes (This is a high-resolution image that can be used to identify bar-codes and identifying marks) Scans hard drive serial numbers with included bar-code scanner Documents operator ID, witness ID, and erasure status of hard drives (The internal field checker of the HD-2X interacts with the IRONCLAD system to record the exact date and time the HD-2X created a degauss cycle that erased the data) Generates IRONCLAD erasure report with JPG images for audit purposes (Provides a searchable, verified database to satisfy auditors) Comes with the economic HD-2X degausser that completely erases all data on hard drives Creates a secure erasure verification process Provides proof of erasure months and years later with IRONCLAD certainty Compact, lightweight, and transportable allows system to be taken to the media Operates off a standard wall outlet Secure and Compliant TheHD-2X IRONCLADwill help you satisfy the most stringent government and industry standards, including: California Senate Bill 1386 DODUp to Secret Classification FCC GDPR (General Data Protection Regulation) GLBA (Gramm-Leach-Bliley Act) HIPAA (Health Information Portability and Accountability Act) NIST (National Institute of Standards and Technology) Guidelines for Media Sanitization NIST SP 800-36 NIST SP 800-88r1 PCI DSS 3.2(Payment Card Industry Data Security Standard) PIPEDA (Personal Information Protection and Electronic Documents Act) Erasure-Verification Tests Hard drives erased with the HD-2X have been tested and verified by hard drive manufacturers, information recovery companies, and private forensic laboratories, which independently confirmed that no data was recoverable. International Standards TheHD-2X is independently tested and certified to meet CE and ANSI standards for safety and compatibility worldwide. Certifications CE, ANSI, FCC Storage Capacity 16 GB Media Types Hard drives:5,000 Oe Tape media:3,000 Oe Degausser throughput (per hour) Erases up to 480 (1.8 in.) hard drivesErases up to 360 (2.5 in.) hard drivesErases up to 60 (3.5 in.) hard drives Degausser with IRONCLAD throughput (per hour) Erases up to 60 hard drives Power Supply HD-2X: 100-240VAC 5%, 50/60 HzIRONCLAD: 90-240VAC, 47-440Hz Weight: HD-2X IRONCLAD: 44 lbs. (18.1 kg.)This is not a shipping weight Overall Dimensions (HxWxD) HD-2X IRONCLAD: 10.2 x 17.8 x 18.2 (in.) 260 x 451 x 463 (mm)Touchscreen: 6.6 x 9.6 x 2.5 (in.) 168 x 244 x 64 (mm) Power Consumption HD-2X: During standby: 24WDuring charge: 156W avg.During erase: 60WIRONCLAD:15W Temperature 41F - 104F (5C - 40C) Humidity 10%H - 40%H Without condensation Warranty HD-2X IRONCLAD: One-year manufacturers limited warranty standardScanner: Ninety-day manufacturers limited warranty standard Made in U.S.A. By Garner Products, Inc.
Garner TS-1 Degausser ( NSA/CSS Listed) AED 115,500.00

Pre-Order
NSA Evaluated Product 20,000 Gauss Erasing Field 45 Seconds Erasing Cycle Middle East Specifications --The Garner TS-1 Data Eliminator, an NSA Evaluated Products List High Security Degausser, utilizes Garner's proven solid-state technology to provide a 20,000 gauss erasing field ensuring complete hard drive and tape erasure of classified and "Top Secret" data. NSA Evaluated Product 20,000 Gauss Erasing Field 45 Seconds Erasing Cycle Middle East Specifications Garner's built-in magnetic field verification system along with onboard diagnostics, confirm the field strength of each and every erase cycle guaranteeing complete erasure every time. Further, the field strength is displayed numerically and graphically allowing the operator to perform periodic performance verification eliminating the need for a separate instrument to check the erasing force. Redundant error checking before, during and after each erase cycle ensures the TS-1 is performing in peak condition. Compact and portable, the TS-1 can be easily transported to the location of the media for on-site erasure and de-classification Listed on the National Security Agency's Evaluated Products List. Erases perpendicular and longitudinal hard drives up to 5,000 Oersteds and magnetic tape media up to 2,800 Oersteds. Alphanumeric LCD display provides easy to read erasure status, field strength, media counter and diagnostics. Single pass, 45 second erasure. Built-in magnetic field verification system guarantees complete erasure. Quiet, table-top, office friendly operation. TS-1 Features and Capabilities: The TS-1 is the newest and most innovative product in the Garner line of degaussers. With 2 Tesla (20,000 gauss) of power, the TS-1 erases the highest coercivity magnetic media available today. The TS-1 erases 5,000 Oe hard drives (laptop, desktop and network up to 1" high) and up to 2,800 Oe high coercivity tape media, including all formats of LTO (1,2,3,4), SuperDLT I & II, DLT, AIT, 3590 Series, 8mm and more, all without any adapters. With a continuous duty rating (no cooling breaks necessary), quiet operation and a 45 second cycle time, the TS-1 offers a fast, cost effective erasing solution for Top Secret data. TS-1 Operations: The TS-1 is exceptionally user-friendly. Simply place your media into the drawer of the TS-1 and push the "Erase" button. Within 45 seconds, the media is erased. Open the drawer and remove the media. It just doesnt get any easier than that! Safeguards: Safeguards built into the TS-1 check the stored power before each erase cycle ensuring complete erasure every time. In addition, a proprietary gauss sensor measures the erasing force in the coil at the time of discharge. If the electrical power or the erasing force is less than specification, the TS-1 will report an error message to the operator and not complete the cycle until the TS-1 meets both power and erasing force requirements. Messages on the LCD Display and lighted push buttons report the status of the TS-1 to the operator. Government Mandates: As an NSA approved degausser, the TS-1 has been tested to and exceeded the most stringent requirements for complete erasure of magnetic media at the highest security levels including Top Secret. This approval meets all compliance standards for government mandates requiring complete elimination of information stored on magnetic media prior to re-use or disposal including: NSA/CSS/DoD Top Secret NIST (National Institute of Standards and Technology) Guidelines for Media Sanitization NIST SP 800-36 NIST SP 800-88 PCI DSS (Payment Card Industry Data Security Standard) HIPAA (Health Information Portability and Accountability Act) PIPEDA (Personal Information Protection and Electronic Documents Act) GLBA (Gramm-Leach-Bliley Act) California Senate Bill 1386 Power Supply 220240 Volots Power Consumption Under standby: 0.5A While charging: 8.0A < 1 second At the time of Erase: 0.5A Degausser System Capacitive Discharge Duty Cycle Continuous Erasure Time 45 second repetitive cycle Magnetic Field 2.0 Tesla (20,000 gauss) Certifications NSA/CSS Erasing Area Size 1.0 in. (H) x 4.5 in. (W) x 6.75 in. (D) Portability Features Two 6" wide retractable machined alloy handles on each side. Media Hard drives up to one inch high including full height, standard and laptop drives, tape cartridges including DLT, LTO, 3590 Series, 8mm and more. Temperature 10F - 112F (-12C - 45C) Humidity 10%H - 40%H (non-condensing) Weight: TS-1: 144 lbs. (66 kg) Shipping: 160 lbs. (73 kg) Size: TS-1 TS-1: 21.5 x 17.5 x 19 in. Shipping: 34 x 26 x 33 in. (546 x 444 x 482 mm) (864 x 660 x 838 mm) Warranty One Year Factory Warranty standard. Extended Warranty available. You can use the optional custom wheeled transport case to carry Garner TS-1 from one location to another.
Garner HD-3WXL Degausser AED 57,750.00

Pre-Order
Erases all hard drives and Tape media including all formats of LTO Continuous duty rating (no cooling necessary) and 10 second cycle time Middle East Specification 220-240 Volts --The HD-3WXL is the newest and most innovative product in the Garner line of degaussers. Erases all hard drives and Tape media including all formats of LTO Continuous duty rating (no cooling necessary) and 10 second cycle time Middle East Specification 220-240 Volts 1 Year Warranty ( Warranty Extensions available) HD-3WXL Operations: The HD-3WXL is exceptionally user-friendly. Simply slide your media into the slot on the left side of the HD-3WXL and push the "Erase" button. Within two seconds your media will be completely erased and will automatically slide out the right side of the HD-3WXL. It just doesnt get any easier than that! If space is at a premium, the HD-3WXL's compact design takes up just over 1 square foot. Degauss vs. Overwrite: The HD-3WXL produces an erasing field several times stronger than the erasing fields produced by the read/write heads in hard drives and tape drives. This makes for a deeper and more efficient erasure than software based wiping programs. Since the HD-3WXL does not rely on software, the HD-3WXL will also completely and permanently erase failed and damaged hard drives regardless of the operating system or interface. Government Mandates: The HD-3WXL will assist you in meeting compliance standards for government mandates requiring complete elimination of sensitive information stored on magnetic media prior to re-use or disposal including: PCI DSS (Payment Card Industry) Data Security Standard NIST (National Institute of Standards and Technology) Guidelines for Media Sanitization NIST SP 800-36 NIST SP 800-88 HIPAA (Health Information Portability and Accountability Act) PIPEDA (Personal Information Protection and Electronic Documents Act) GLBA (Gramm-Leach-Bliley Act) California Senate Bill 1386 Power Supply 220-240 Volts Power Consumption Under standby 0.2AWhile charging 8.0AAt the time of ERASE 0.5A Degausser System Capacitive Discharge Operating Time Duty Cycle: Continuous Erasing time: 10 seconds per hard drive Magnetic Field 9,000 Oe Max. Media Size 6.75 in. (W) x 4.5 in. (H) x 1.8 in. (D) Erasing Area Size 6.75 in. (W) x 4.5 in. (H) x 1.8 in. (D) Media Full height hard drives, Standard 1" heigh hard drives, laptop hard drives, 2.5 type HDD, 3.5 type HDD, DLT, LTO, 3490 formfactors and more. Temperature 41F - 104F (5C - 40C) Humidity 10%H - 40%H (without condensation) Weight HD-3WXL: 75 lbs. (25 Kg)Shipping: 95 lbs. (37.64 Kg) Size HD-3WXL: 12.25 in. (L) x 13.125 in. (W) x 18.75 in. (H) without slide12.25 in. (L) x 22.625 in. (W) x 18.75 in. (H) with slide Warranty 1 Year Factory Warranty Standard, Optional 3 Year Factory Warranty available.
Garner HD2E Degausser AED 22,050.00

Pre-Order
Most Popular Degausser in Class 60 Seconds Erase cycle. Continuous duty cycle Erases All Hard drives and tapes Portable only 15 kilos weight --With Garner HD-2 Degausser, you can safely erase your Hard drives ( Desktop, laptop and network upto 1.5" high) and tape media like LTO, DLT, SDLT, DDS, AIT, 3590,3592 etc. Most Popular Degausser in Class 60 Seconds Erase cycle. Continuous duty cycle Erases All Hard drives and tapes Portable only 15 kilos weight Garner HD-2 Degausser is exceptionally user friendly. Simply place the media you want to erase in the drawer and close it. Within 60 Second HD-2 erases the media. Open the drawer and remove your media. You can use it continuously, there is no cooling required. The HD-2 has been independently tested and certified to meet both ANSI and CE standards. Built-in safegaurds check the stored power before each erase cycle ensuring complete erasure every time. Audible tones and lighted push buttons report the status of the HD-2 to the operator. HD-2 Degausser is microprocessor controlled and weights only 20 kilos. It can fit right on a desktop . Garner HD-2 can be used to Degauss all kinds of Magnetic Hard drives ( 2.5", 3.5", SATA, IDE, SCSI etc) and all kinds of Magnetic Tapes like LTO, DDS, DLT, SDLT, QIC etc. It can't be used on SSD hard drives and Flash Drives. Eliminate the risk of information loss during media transportation. Transport the HD-2 degausser using a convenient Carry case with Caster wheels. The Case is not included with the degausser and must be purchased separately. Power Supply : 220 Vols +/- 5% Power Consumption : 0.2A standby, 4.0A Charging ( less than a second), 0.5A Erase Degausser System : Capacitive Discharge Magnetic Field : 8,300 Oe, 0.83 Tesla Erasing Area Size : 1.5 inch x 4.5 inch x 6.75 inch

Physical Destruction devices like Hard drive shredders and SSD destroyers in UAE

Although degaussing is the easiest way for data sanitization , sometimes there are reasons to use a physical destroyer. First - the destroyer offers a physical verification so you can see your HDD/SSD being physically crushed. Second- for SSDs degaussing doesn't work, so Hard drive shredders are the only device that works for SSD and HDD. The most popular hard drive shredders are the hard drive benders and hard drive punchers because they work quietly. There are also hard drive shredders (also called hard drive destroyers and hard drive particulators) that crush the hard drives into small particles. There are 2 types of hard drive destroyers - those that punch holes in the flash drives and shredders that crush SSDs into small pieces.

We deal with all kinds of Data Destructors in UAE including Manual Hard drive Destoyers, Hydraulic hard drive destroyers and hard drive shredders.
ProDevice OMS900 Hard Drive Shredder in UAE CALL FOR PRICE
ProDevice OMS500 shredder The automatic office mobile shredder ProDevice OMS500 is a professional device for the destruction of 2.5” and 3.5” hard disks, SSDs, LTO and DDS tapes, USBs, CDs, DVDs, memory sticks, Blu ray optical media, credit and ID cards. The shredder is not suitable for shredding server disks – another device from the OMS line ProDevice is dedicated to shredding this type of media: . ProDevice Mobile App. available and included to scan the serial number of the media and generate an automatic report. Why choose the ProDevice OMS500 Automatic shredder for HDD and SSD There are many reasons, but the most important of them are: The shredder has patented  cutters cleaning system. For prolonged usage and sharpness, the cutters are made of special hardened steel. The device is equipped with solid metal gears. The shredder is easy-to-use and has double entry for different data storage media. Automatic reverse eliminates material jamming. The emergency stop button ensures the safety of the operator. Self-diagnosis reader guarantees better control of the device. The device notifies the user when the container for shredded media is full. A dedicated recording system is available as an option (4 cameras). When shredding, it records four screens such as worker, two cutting blocks and bin. The perfect device for HDD shredding ProDevice OMS500 is the perfect solution for all organizations, companies or departments with high volume of sensitive data or data with high need of protection. 1.5kW engine and solid cutters shreds hard drives, both 2.5 “and 3.5”. Compact design makes it a comfortable device in the office. The ProDevice OMS500 shredder ensures compliance with the mandates, regulations and security guidelines ISO/IEC 21964 H-3/H-4 for hard drives with magnetic data media (two entries) E-2 for electronic data media DIN66399 H-3/H-4 for hard drives with magnetic data media (two entries) E-2 for electronic data media OMS500 is a perfect solution for companies and institutions that care for the highest standards related to the protection of confidential data, defined by GDPR. You can shred all kinds of Media with this as follows HDD: 2.5″ and 3.5″ tablets, mobile phones – lithium batteries need to be removed before the destruction/shredding process SSD disks USB CD/DVD memory cards Technical specification PRODEVICE OMS500 PRODEVICE OMS500+ Engine power 1.5kW 1.5kW Power supply Single phase, 230V, 50H Single phase, 230V, 50H Performance 4 - 5 media per minute 4 - 5 media per minute Shred size 40mm x 40mm~80mm / 5mm x 40mm~80mm 40mm x 40mm~80mm / 5mm x 40mm~80mm Entry width 110mm /90 mm 110mm /90 mm Auto start, reverse and stop Yes Yes Overload protection Yes Yes Auto stop on jamming Yes Yes Safety features Yes (door open & emergency buton) Yes (door open & emergency buton) Acoustic level at idling speed 55dB 55dB Recording system No Yes Mobility Casters (with 2 lockers) Casters (with 2 lockers) Shredder dimensions 620mm x 920mm x 1180mm 620mm x 820mm x 1280mm Weight 473kg 485kg Warranty 1 year (possible warranty extension) 1 year (possible warranty extension)
ProDevice OMS500 Automatic Media Shredder for HDD, SSD, ... CALL FOR PRICE
ProDevice OMS500 shredder The automatic office mobile shredder ProDevice OMS500 is a professional device for the destruction of 2.5” and 3.5” hard disks, SSDs, LTO and DDS tapes, USBs, CDs, DVDs, memory sticks, Blu ray optical media, credit and ID cards. The shredder is not suitable for shredding server disks – another device from the OMS line ProDevice is dedicated to shredding this type of media: . ProDevice Mobile App. available and included to scan the serial number of the media and generate an automatic report. Why choose the ProDevice OMS500 Automatic shredder for HDD and SSD There are many reasons, but the most important of them are: The shredder has patented  cutters cleaning system. For prolonged usage and sharpness, the cutters are made of special hardened steel. The device is equipped with solid metal gears. The shredder is easy-to-use and has double entry for different data storage media. Automatic reverse eliminates material jamming. The emergency stop button ensures the safety of the operator. Self-diagnosis reader guarantees better control of the device. The device notifies the user when the container for shredded media is full. A dedicated recording system is available as an option (4 cameras). When shredding, it records four screens such as worker, two cutting blocks and bin. The perfect device for HDD shredding ProDevice OMS500 is the perfect solution for all organizations, companies or departments with high volume of sensitive data or data with high need of protection. 1.5kW engine and solid cutters shreds hard drives, both 2.5 “and 3.5”. Compact design makes it a comfortable device in the office. The ProDevice OMS500 shredder ensures compliance with the mandates, regulations and security guidelines ISO/IEC 21964 H-3/H-4 for hard drives with magnetic data media (two entries) E-2 for electronic data media DIN66399 H-3/H-4 for hard drives with magnetic data media (two entries) E-2 for electronic data media OMS500 is a perfect solution for companies and institutions that care for the highest standards related to the protection of confidential data, defined by GDPR. You can shred all kinds of Media with this as follows HDD: 2.5″ and 3.5″ tablets, mobile phones – lithium batteries need to be removed before the destruction/shredding process SSD disks USB CD/DVD memory cards Technical specification PRODEVICE OMS500 PRODEVICE OMS500+ Engine power 1.5kW 1.5kW Power supply Single phase, 230V, 50H Single phase, 230V, 50H Performance 4 - 5 media per minute 4 - 5 media per minute Shred size 40mm x 40mm~80mm / 5mm x 40mm~80mm 40mm x 40mm~80mm / 5mm x 40mm~80mm Entry width 110mm /90 mm 110mm /90 mm Auto start, reverse and stop Yes Yes Overload protection Yes Yes Auto stop on jamming Yes Yes Safety features Yes (door open & emergency buton) Yes (door open & emergency buton) Acoustic level at idling speed 55dB 55dB Recording system No Yes Mobility Casters (with 2 lockers) Casters (with 2 lockers) Shredder dimensions 620mm x 920mm x 1180mm 620mm x 820mm x 1280mm Weight 473kg 485kg Warranty 1 year (possible warranty extension) 1 year (possible warranty extension)
ProDevice OMS130 Automatic Portable Media Shredder for S... CALL FOR PRICE
The ProDevice OMS130 automatic shredder is a compact office device for the physical destruction of data carriers, such as tablets and mobile phones, SSDs, USB drives, CDs / DVDs and memory cards. The shredder is not suitable for shredding HDDs and server disks – other models of the ProDevice OMS line devices are dedicated to this type of media: (hard drives) and (hard drives and server disks). ProDevice Mobile App. available and included to scan the serial number of the media and generate an automatic report. Why ProDevice OMS130 Flash Media Auto shredder? There are many reasons, but the most important of them are: The shredder has patented  cutters cleaning system. For prolonged usage and sharpness, the cutters are made of special hardened steel. The device is equipped with solid metal gears. The shredder is easy-to-use. Automatic reverse eliminates material jamming. Self-diagnosis reader guarantees better control of the device. The device notifies the user when the container for shredded media is full. The perfect device for destroying flash media like SSD, Flash Drives, Mobile phones and SD Cards ProDevice OMS130 is an ideal solution for companies and institutions that care about the security of storage media containing sensitive data. It guarantees a high level of security for destroyed, electronic flash data carriers. The shredder is easy to use and has a modern design. The ProDevice OMS130 shredder ensures compliance with the mandates, regulations and security guidelines ISO/IEC 21964 O-3 for optical media E-3 for electronic data media DIN66399 O-3 for optical media E-3 for electronic data media OMS130 is a perfect solution for companies and institutions that care for the highest standards related to the protection of confidential data, defined by GDPR. Media for the destruction tablets. mobile phones – lithium batteries need to be removed before the destruction/shredding process SSD disks USB CD/DVD memory cards Technical specification PRODEVICE OMS130 Engine power 0.75kW Power supply 110 or 220V / 50 or 60Hz Performance 5 - 6 media per minute Shred size 4mm x 15mm Entry width 165mm Auto start, reverse and stop Yes Overload protection Yes Auto stop on jamming Yes Safety features Yes (door open button) Acoustic level at idling speed 55dB Operation displayer type Multifunctional touch screen LED Mobility Casters (with 2 lockers) Shredder dimensions 550mm x 550mm x 983mm Weight 130kg Warranty 1 year (possible warranty extension) According to Article 6.1 sec. a general regulation on the protection of personal data of 27 April 2016 (OJ L 119 from 04.05.2016) I hereby agree for processing my personal data for the purposes of contact. The full information clause can be found in the privacy policy.
ProDevice DGX02 Automatic Media Shredder for HDD, SSD, Fl... CALL FOR PRICE
Prodevice DGX02 automatic media shredder With this mobile, automatic industrial shredder ProDevice DGX02 you can physically shred any type of data carrier /data media including Hard drives, SSDs and tape media . Ideal for large companies that have larger amounts of storage media to destroy. ProDevice Mobile App. available and included to scan the serial number of the media and generate an automatic report. Why ProDevice DGX02 automatic Hard drive shredder Some of the features of our automatic media shredder are Hardened cutters shred all types of data carriers: hard drives (including server drives), optical and SSD drives, tapes for streamers, floppy disks, thermal transfer tapes, flash media, mobile phones, tablets and laptops. The 5.5 kW engine is designed for continuous operation. In the class of industrial devices, the shredder is distinguished by small dimensions and weight. The ProDevice DGX02 can be transported to various locations in a van weighing up to 3,500 kg. A simple and intuitive control system means that the operation of the device does not require special operator qualifications. Destroyed data carriers are placed in a durable container with a capacity of 216 liters. It can be placed on a transport cart and easily transported to any location. Safely shred your data Media The ProDevice DGX02 is safe to use. The sturdy legs of the shredder ensure its stability during operation. The automatic reverse of the cutting system protects the engine against overload in the event of a media jam. The drawer media feeding system is equipped with a contactor protection. Thanks to this, opening the drawer stops the cutters. The shredder can also be stopped at any time by pressing the emergency button. High performance, versatility and reliability are appreciated by corporations and enterprises providing services for destroying data carriers. Our Media Shredder complies with standards ISO/IEC 21964 H-5 for hard drives HDD O-2 for optical data media T-3 for magnetic tape media E-2 for electronic data media DIN66399 H-5 for hard drives HDD O-2 for optical data media T-3 for magnetic tape media E-2 for electronic data media DMS 2008 / level C for physical HDD destruction Destroying data carriers with the ProDevice DGX02 device causes disks, tapes, tablets or mobile phones to be crushed into small pieces. DGX02 is a perfect solution for companies and institutions that care for the highest standards related to the protection of confidential data, defined by GDPR. Media for the destruction Media you can shred with our DGX02 automatic shredder HDD 2,5” i 3,5” (also in the frame) and SSD Magnetic tapes Pendrives Mobile phones, tablets, laptops – lithium batteries need to be removed before the destruction/shredding process CD, DVD, floppy discs Technical specification PRODEVICE DGX02 Performance Up to 3.000 media/hour Engine power 5,5 kW (installation of a more powerful unit possible at an additional cost) Power supply 400V Shred size 15mm Overload protection Yes Auto stop on jamming Yes Auto start, reverse and stop Yes Safety features Yes (door open & emergency button) Acoustic level at idling speed 55 dB Shredder dimensions 880mm x 1350mm x 1500mm Weight 700 kg Dimensions of plastic container for crushed storage media 800mm x 600mm x 450mm Warranty 2 years (possible warranty extension) The manufacturer reserves the right to introduce changes to the design of devices, deemed necessary by the manufacturer to improve them.
ProDevice MMD360+ Manual Media Destoyer for HDD, SSD and ... CALL FOR PRICE
ProDevice MMD360 + is a Manual destroyer for the physical destruction of data carriers like SSDs and Hard disk Drives . It is an interesting alternative to fully automated devices available on the market. The machine is characterized by durability, reliability and compliance with data protection requirements. Due to its small size and light weight, the MMD360 + can be used in any office. Further ProDevice Mobile App. available and included to scan the serial number of the media and generate an automatic report of media you destroy. Why Our Media Destroyer / HDD Crusher Some of the special features of our HDD Destroyer are The device physically destroys 2.5″ and 3.5″ hard drives, SSDs, magnetic tapes, pen drives, tablets and mobile phones. Two modules with interchangeable steel pins for destroying media are standard: with a single one for punching hard drives, with 23 pins for flash media perforation. The unique technology used in the defense industry guarantees long-term durability of the device’s coating. The destroyer is operated manually, whereby it does not require a lot of physical strength from the operator. The device is very stable during operation. The legs are covered with rubber to prevent the shredder from moving. Hard, resistant Pins to destroy your hard drives that last long The elements of the ProDevice MMD 360+ destroyer are nitrided: a special thermo-chemical treatment. Thanks to this, the top layer is extremely hard, and thus resistant to mechanical damage and abrasion. The outer shell formed on the metal surface protects the structure of the device against the adverse effects of external factors (e.g. humidity, temperature, etc.), whereby securing it against corrosion. Therefore, the destroyer meets the most stringent operational requirements. The nitriding technology is successfully used in the defense industry to produce high-quality weapons. Our Media Destroyer meets the Security mandates ISO/IEC 21964 H-3 for hard drives HDD T-1 for magnetic tape media E-1 for electronic data media DIN66399: H-3 for hard drives HDD T-1 for magnetic tape media E-1 for electronic data media DMS 2008: level A for physical HDD destruction Destroying data media with the ProDevice MMD360+ device causes disks, tapes, tablets or cell phones to be deformed and damaged. MMD360+ is a perfect solution for companies and institutions that care for the highest standards related to the protection of confidential data, defined by GDPR. Media you can destroy with our Destroyer HDD 2,5” i 3,5” and SSD Magnetic tapes Pendrives Mobile phones, tablets – lithium batteries need to be removed before the destruction/shredding process CD, DVD, floppy discs Technical specification PRODEVICE MMD360+ Dimensions (with handle) 560mm x 340mm x 750mm Weight without flash media destruction module 34kg Weight with flash media destruction module 35kg Pressure force up to 4,5 ton Warranty 5 years
Garner Flash Pro ( Flash, USB, Mobile, Mini Tablet Destro... CALL FOR PRICE
shreds media chips into an average fragment size less than 52mm. Destroys smartphones, mini-tablets (up to 170 mm wide), USB sticks, SSD and optical media Up to 150 smart phones, 500 USB thumb drives, and 1500 CDs per hour --As the world leader in data elimination, Garner is proud to introduce theFLASHPROTMSolid-State Destroyer. TheFLASHPRO is a high-volume destroyer specifically designed to shred digital media in an office environment. The FlashPro destroys a wide variety of media including smartphones, mini-tablets (up to 170 mm in width), USB sticks, solid-state drives (SSD), and optical media. SmartCut Shredding System The FLASHPRO'sSmartCutTMshredding system automatically adjusts to the shape of the media by reversing and forwarding the cutting wheels until the media is gripped. The cutting wheels stop when the destruction process is complete. FLASHPRO Prevents forensic recovery of data stored on solid-state memory chips by shredding media chips into an average fragment size less than 52mm. Destroys a wide variety of media including smartphones, mini-tablets (up to 170 mm in width), USB sticks, solid-state drives (SSD) and optical media* Fully automated with SmartCut High volume destroyer with a destruction capacity of up to 150 smart phones, 500 USB thumb drives, and 1500 CDs per hour Office quiet (65 decibels) and plugs into a 20A standard receptacle outlet *All items destroyed in the FLASHPRO must have the battery removed prior to destruction. Secure and Compliant The Garner FLASHPRO will help you satisfy the most stringent government and industry standards, including: California Senate Bill 1386 DOD (Emergency Destruction and up to Secret Classification) FCC GLBA (Gramm-Leach-Bliley Act) HIPAA (Health Information Portability and Accountability Act) NIST (National Institute of Standards and Technology) Guidelines for Media Sanitization NIST SP 800-36 NIST SP 800-88r1 PCI DSS 3.2(Payment Card Industry Data Security Standard) PIPEDA (Personal Information Protection and Electronic Documents Act) International Standards The FLASH PRO is independently tested and certified to meet CE standards for safety and compatibility worldwide. Power Supply 230V/50 Hz, 240V/50 Hz, 120V/60 Hz Certifications CE Included Catch basket 6.6 gal. (25 l); Plastic bag 17.3 x 13 x 37 (in.) 440 x 330 x 950 (mm); Oil bottle 3.7 oz (110 ml) Media Mini-tablets (up to 170 mm in width), USB sticks, solid-state drives (SSD) and optical media* *All items destroyed in the FlashPro must have the battery removed prior to destruction. Memory Chip Size Average memory chip fragment after destruction is less than 52mm Destruction estimated up to Qty/Hour Up to 100 Mobile phones, 1500 solid-state drives,2000 USB sticks, 1500 CDs, and1000 Floppy Security Meets E-3 security requirements Destruction Chamber Capacity 6.5 in. (165.1 mm) wide Certifications CE Temperature 41F - 104F (5C - 40C) Humidity 10%H - 40%H Without condensation Weight 255.7lbs. (116 kg.) Size (HxWxD) 22.8 x 24 x38.6 (in.) 580 x610 x980 (mm) Warranty One-year manufacturers limited warranty standard.
Garner PD-5 Hard drive Destroyer ( NSA/CSS EPL-Listed) CALL FOR PRICE
NAS/CSS EPL Listed Destroyer Destroys all kinds of Hard drives Destroys SSDs with optional Adapater Middle East Specifications --PD-5 is the fastest and lightest NSA/CSS EPL listed hard drive destroyer on the market. With the optional SSD-1 solid-state destroyer you can both perforate and waffle solid-state, flash, compact flash, USB Thumb drives and solid-state hybrid drives (SSHDs). NAS/CSS EPL Listed Destroyer Destroys all kinds of Hard drives Destroys SSDs with optional Adapater Middle East Specifications Compliant Listed on the NSA/CSS Evaluated Products List (EPL) for Hard Drive Bending Devices. Meets the toughest standards for bending hard drives containing U.S. government classified top-secret data, as well as all other government and industry standards for data destruction prior to disposal. Verified Independently tested and certified to meet CE safety and compatibility standards. Media Versatility Destroys laptop, standard, and full-height (1.66) hard drives. The optional SSD-1 allows you to expand the range of media destroyed to include solid-state drives (SSDs)laptop, flash, compact flash, USB thumb, and controller boards of solid-state hybrid drives (SSHDs). Office compatible Quiet enough to use in an office and about the size of a desktop computer, weighs just 79 lbs., uses no messy hydraulic fluid, and plugs into any standard wall outlet worldwide. Clean Uses no hydraulics, eliminating concerns about messy hydraulic fluid spills and the need for a spill containment mat. Total Destruction Delivers approximately 15,500 pounds of crushing power to hard drives. When used with the optional SSD-1, 90 pins pierce solid-state media from top and bottom, causing both perforation and waffling, which destroy the individual memory chips. Incredibly Fast High-torque sensing technology allows the crushing wedge to zoom quickly to locate the media then increases torque to maximize crushing power, delivering total destruction in 18 seconds or less. Its fast enough to meet the Department of Defense emergency-destruction guidelines and requires no cool down between cycles. Versatile Requires no adapters to destroy hard drives up to 4.5 inches (113 mm) wide by 6.5 inches (165 mm) deep by 2 inches (50 mm) high, including network SCSI and IDE drives. Allows you to specify voltage options when ordering for international locations. The optional SSD-1 expands your capabilities to include solid state drives and flash media. High capacity Destroys up to eight laptop drives, two standard 1-inch hard drives, or one full-height (1.66 inches) hard drive during each destruction cycle. The optional SSD-1 handles one standard solid-state drive; one SSHD controller board; or the number of flash, compact flash, USB thumb drives and flash drives that fit into the SSD-1 destruction chamber. Easy to use Push-button operation, auto sensing of media type, and LCD screen keep you informed at each step of the destruction process. Simply place the media into the crush chamber, close the door, press the button, and wait eighteen seconds or less to retrieve the destroyed media. Software independent Because the PD-5 doesnt rely on software, it can destroy any working or nonworking laptop, desktop, or network hard drive. The optional SSD-1 requires no software, as well, which allows it to destroy working and nonworking SSD, flash media, and SSHD controller boards. Power Supply 220V Middle East Specifications Destruction Time Destroy cycle: 9 seconds, Full cycle: 22 seconds Certifications NSA/CSS EPL and CE Destruction Chamber Size 2.3 inches (H) x 4.9 inches (W) x 6.8 inches (D) Hard Drive/SSD Capacity One full height, two standard height or eight laptop hard drives destroyed at one time,With optional SSD-1: One SSD, one SSHD controller board, multiple flash, compact flash, and USB thumb drives Temperature 41F - 104F (5C - 40C) Humidity 10% - 40% (noncondensing) Weight Unit: 79 lbs. (36 kg.) Size 14.9 inches (H) x 7.5 inches (W) x 18.6 inches (D) Warranty One-year manufacturers limited warranty standard, optional three-year limited warranty available (Optional) SSD-1 Specifications Destruction Chamber Dimensions 0.5 inches (H) x 3 inches (W) x 6 inches (D) Overall Dimensions 2.8 inches (H) x 4.8 inches (W) x 6.8 inches (DL) Destruction Capacity One SSD, one SSHD controller board, or multiple flash, compact flash, and USB thumb drives that fit into the destruction chamber Weight 8.3 lbs. Warranty One-year manufacturers limited warranty.

Multi Pass Overwriting Devices : Wipe and Reuse your Media

Degaussing and physically destroying your discs will render them unusable. If you want to permanently erase the data from your disc and reuse it, you can only do this with a multi-pass overwrites. A multi-pass write operation involves writing to the entire disc, erasing it, and then writing to it again. The industry standard is 7 passes to ensure a secure erase. In practise, however, overwriting in 3 passes should also permanently erase the data. Multi-pass writing is a lengthy process and takes time. You can do this with software on a special PC or use a specially designed device. Devices are available for SAS, SATA and NVMe media and with mutiple ports.

Ureach Carry Pro SATA SSD/HDD Duplicators ( 30GB/Min) CALL FOR PRICE
Feature Speed transfers up to 24 GB per minute. Systems & files copy mode supports Windows (FAT16/32/64, NTFS), Linux (ext2/ext3/ext4) and Mac (HFS, HFS+, HFSX.) Data Sanitization: Quick Erase, Full Erase, DoD Erase and DoD Erase+Compare. Open platform design supports NVMe & SATA Express M.2/U.2(via adapter)/PCIE SSD/Mini PCIe(via adapter). Log report management records all task details for better enhanced management. Cable free connection for easier M.2 connection and disconnection. Supports M key and B+M key for M.2 PCIe devices. No PC mode U-Reach PE Series is a professional PCIe NVMe M.2 duplicator, specially designed for high volume duplication. U-Reach adopted a unique multitasking technology that can simultaneously copy PCIe M.2 devices with a high transfer speed of 24 GB per minute. Apart from the 2.5 "/3.5" SATA hard disks and solid state disks, it also Supports IDE, iVDR, eSATA, mSATA SSD, M.2(NGFF), CFast and other interfaces via optional adapters Models Available PRO398 1:3 SATA Duplicator/Eraser Pro198 1:1 SATA Duplicator /Eraser
Ureach GT-864 Professional SATA/SAS Touch Screen HDD Eraser CALL FOR PRICE
Ureach GT-864 is a robust Data Eraser that you can use to wipe data off SAS and SATA hard drives.  There are various algorithms like NIST US DOD , DOE and also customized erasure modes. You can erase upto 4 hard drives at a time with this eraser. Erase Standards of Hard drive Data Wiper when you are erasing data from your hard drive, you need to be absolutely sure that this data can not be retrieved again. There are robust standards like 7 Pass NSA erase standards that Ureach GT-864 complies with. Here is a list of all the standards NSA Erase U.S. Army AR380-19 Erase US Air Force 5020 Canadian OPS-II Canadian CSEC ITSG-06 German VSITR Russian GHOST p50739-95 1-Pass Erase 00/random (NIST compliant) Secure Erase (NIST compliant) Enhanced Secure Erase (NIST compliant) U.S. DoD 5220.22-M U.S. DoD 5220.22-M ECE U.S. DoE M205.1-2 Apart from these, you can also define your own erase mode. For example,you can set the number of rounds (up to 40 rounds) and write data, including 00, FF, random number, comparison, or enter your own hexadecimal value. Event LOG Report of the Hard drives earased All the execution processes can completely be recorded, such as running time, operation mode,the speed of the device, etc. The report can be exported via a USB drive to a computer for viewing and can also be used with an external printer. After the operation is completed, an erasure report will be produced, which reduces transcription errors to ensure that the operation is fully performed. Asynchronous Erase : Each Hard drive is erased independently Considering the unequal capacity of each hard drive, to enhance the erasing efficiency, eachport can be operated independently from the second round onwards through a blue quickbutton. This allows the drive to perform data erasure independently without waiting for other drives. SGS-DoD Erase Verification / Unrecoverable by Recovery Software The erasing function has been verified by SGS and cannot be recovered even with recoverysoftware (Tenorshare 4DDiG) SMART Info for the drive being erased " SMART Info" provides access to the drive's data. This includes the drive model, version, serial number, capacity, SMART Info, and erase write values. When printing the erasure report, the SMART info will also be output synchronously. Please note that the device needs to support the SMART Info command. Stand-alone Drive erasure  & No Threat of Virus The risks from the Internet include computer viruses, data tampering, and other issues. Thestandalone operation can avoid information security leakage and strengthen the securitymanagement level. Erase SAS, SATA, mSATA, M.2 , CFAST The device natively supports the SAS and SATA hard drive.  Other formats can be supported by optional adapters  like mSATA, M.2 and CFast
Ureach Carry series 1:3 SAS/SATA Duplicator and Sanitizer... CALL FOR PRICE
SA330 is an ultra-high speed SAS/SATA portable duplicator and sanitizer.  This standalone Duplicator has independent SAS port for copying SAS/SATA hard drives without needing a PC. SA330 smart Quick Copy mode supports FAT16/32/64, Windows NTFS, Linux ext2/3/4, and Mac HFS/HFS+/HFSX formats which can copy only data contained area that provides increased production efficiency. Data Wiping/Santization function Complies with the U.S. Department of Defense's erasing standard (DoD 5220.22 M) and Secure Erase (NIST 800-88), ensuring that the data is removed beyond retreival.  Features of SA330 Portable mini SAS Duplicator Stand alone Duplication of upto 3 Hard drives at a time You don't need to use a PC for hard drive copy and erase function. Upto 30GB/minute duplication speed of SAS and SATA Drives SAS 2.0 Specifications mean ultra high speed duplication with speeds upto 30GB/Minute - the actual speeds vary. Hot Swap and Auto power off after hdd Duplication Automatically power off the HDD after copying 18TB+ HDD compatible with HDD Copier Embedded controller supports 18TB + hard drives also Read only Source port to read from This funcation can not be disabled so you know that your source hard drive is always safe with a read only . Multiple HDD data erasing/sanitizing function for Secure Wipe DOD 5220.22M, NIST 800-88 Secure erase, Quick erase and fill erase mode to securly wipe the data off your hard drive. Data Comparision function Bit by Bit comparison to ensure that data is copied 100%. Specifications of SA310 Hard drive Duplicator   Model SA310 SA330 Target 1:1 1:3 Maximum Transfer Speed 30GB/min. *Actual performance maydepend on HDD transfer speeds Capacity Support the latest available capacity on the market. Designed to support capacities up to 32TB+. Display Monochrome LCD Control Button 4 Push Buttons(▲, ▼, OK, ESC ) Compatible Device SAS,1.8"/2.5"/3.5” SATA HDDs andSSDs.2.5"/3.5” IDE, iVDR, eSATA, mSATA, Micro SATA, M.2 (NGFF),and CFast (with required adapters) Copy Mode System and Files, All Partitions, Whole HDD, Percentage Support Format Quick copy (System and Files): FAT16/32/64, NTFS, Linux (Ext2/3/4), Mac (HFS/HFS+/HFSX), GPT, DynamicWhole HDD : Supports all formats. Supported OS All (Windows, MAC, Linux, RAID, etc.) Power Supply 110-220V 7A Temperature Range Working Temperature: 5°C ~ 45°C ; Storage Temperature: -20°C ~ 85°C Humidity Range Working Humidity: 20% ~ 80% ; Storage Humidity: 5% ~ 95% Safety & Regulations FCC, CE, RoHS
Ureach Carry series 1:1 SAS/SATA Duplicator and Sanitizer... CALL FOR PRICE
SA310 is an ultra-high speed SAS/SATA duplicator and sanitizer, and each SAS port is independent. That's why no matter how many targets are running it’ll provide the same performance speed, far beyond PC-based duplicator capabilities.   SA310 is specially designed for professional use. The smart Quick Copy mode supports FAT16/32/64, Windows NTFS, Linux ext2/3/4, and Mac HFS/HFS+/HFSX formats which can copy only data contained area that provides increased production efficiency.   Complies with the U.S. Department of Defense's erasing standard (DoD 5220.22 M) and Secure Erase (NIST 800-88). It is important to ensure that data contained on discarded devices cannot be retrieved and can be securely transferred. Features of SA310 Portable mini SAS Duplicator Stand alone Duplication of Hard drives You don't need to use a PC for hard drive copy and erase function. Upto 30GB/minute duplication speed of SAS and SATA Drives SAS 2.0 Specifications mean ultra high speed duplication with speeds upto 30GB/Minute - the actual speeds vary. Hot Swap and Auto power off after hdd Duplication Automatically power off the HDD after copying 18TB+ HDD compatible with HDD Copier Embedded controller supports 18TB + hard drives also Read only Source port to read from This funcation can not be disabled so you know that your source hard drive is always safe with a read only . Multiple HDD data erasing/sanitizing function for Secure Wipe DOD 5220.22M, NIST 800-88 Secure erase, Quick erase and fill erase mode to securly wipe the data off your hard drive. Data Comparision function Bit by Bit comparison to ensure that data is copied 100%. Specifications of SA310 Hard drive Duplicator   Model SA310 SA330 Target 1:1 1:3 Maximum Transfer Speed 30GB/min. *Actual performance maydepend on HDD transfer speeds Capacity Support the latest available capacity on the market. Designed to support capacities up to 32TB+. Display Monochrome LCD Control Button 4 Push Buttons(▲, ▼, OK, ESC ) Compatible Device SAS,1.8"/2.5"/3.5” SATA HDDs andSSDs.2.5"/3.5” IDE, iVDR, eSATA, mSATA, Micro SATA, M.2 (NGFF),and CFast (with required adapters) Copy Mode System and Files, All Partitions, Whole HDD, Percentage Support Format Quick copy (System and Files): FAT16/32/64, NTFS, Linux (Ext2/3/4), Mac (HFS/HFS+/HFSX), GPT, DynamicWhole HDD : Supports all formats. Supported OS All (Windows, MAC, Linux, RAID, etc.) Power Supply 110-220V 7A Temperature Range Working Temperature: 5°C ~ 45°C ; Storage Temperature: -20°C ~ 85°C Humidity Range Working Humidity: 20% ~ 80% ; Storage Humidity: 5% ~ 95% Safety & Regulations FCC, CE, RoHS
PE Series: NVMe M.2 Duplicator CALL FOR PRICE
Quick Features of NVMe Duplicator   Speed transfers up to 24 GB per minute. Systems & files copy mode supports Windows (FAT16/32/64, NTFS), Linux (ext2/ext3/ext4) and Mac (HFS, HFS+, HFSX.) Data Sanitization: Quick Erase, Full Erase, DoD Erase and DoD Erase+Compare. Open platform design supports NVMe & SATA Express M.2/U.2(via adapter)/PCIE SSD/Mini PCIe(via adapter). Log report management records all task details for better enhanced management. Cable free connection for easier M.2 connection and disconnection. Supports M key and B+M key for M.2 PCIe devices. U-Reach PE Series is a professional PCIe NVMe M.2 duplicator, specially designed for high volume duplication. U-Reach adopted a unique multitasking technology that can simultaneously copy PCIe M.2 devices with a high transfer speed of 24 GB per minute. Duplicate NVMe flash at upto 24GB/Min U-Reach PE Series PCIe SSD duplicator is capable of copying at  24GB/min. on all HDDs simultaneously, without any speed degradation as number of targets increase. This duplicator is great for manufacturers. Immediate next SSD duplication When each round of duplication is completed, the next round can start immediately without having to wait or restart the machine Copy both NVMe and SATA Converter chips are not being adopted by PCIe series which deploys an M.2 interface with native NVMe/SATA protocols. This directly transfer the data to enhance the compatibility during the duplications. PC Less Copying of SSD Industrial-grade FPGA design not only facilitates cross interface / cross-protocol duplication but avoids restarting the system after each round of duplication. Note: When doing cross-protocol duplication, it is recommended to use a data disk. If you are copying OS system, it is recommended to use the same protocol device to ensure the device can boot into the operating system properly. Intelligent Duplication mode U-Reach PCIe SSD duplicator offers a diverse of duplication modes. The user may select the appropriate mode based on application demand. Illustration of Copy methods The areas containing data are marked in blue. The areas being copied are marked in red. Duplication time depends on the speed supported by the hard drive's controller chip. Source Management System The administrator can through a specific software store the image files on the computer for centralized management. When needed, this image files will be sent to the duplicator for duplication. This is designed specifically for production plant  as this makes it easier to mange the source and reduce human error. Cross Interface Duplication PE Series with the corresponding module,  it can duplicate target with different interface. High Compatibility Quick copy mode supports Windows (FAT16/32/64), Linux (ext2/ext3/ext4/LVM), and Mac (HFS/HFS+/HFSX) formats. Whole media copy mode supports all system and proprietary formats. Supports various brands. Designed to support 18TB+ capacities.  Supports MBR and GPT partitioning. Event Log Report  U-Reach PCIe SSD(M.2) duplicators has an unique mechanism to prevent alteration of its Event Log Report. It records the operation results and other information of each devices completely. It is an important asset for production management and analysis. Duplicators Models Available   Ureach PE600, 1 to 5 Duplicator Ureach PE1100 1 to 10 duplicator Ureach PE1600 1 to 15 duplicator Ureach PE2100 1 to 20 Duplicator
SATA/SAS Duplicator/Eraser CALL FOR PRICE
Available in 9G/Min and 18G/Min 1-7 , 1-15 and 1-25 targets Works for SSDs and HDDs Available for SATA only or SATA + SAS -- MT-H Series: SATA Hard Disk /SSD Duplicator and Eraser MT-H series is a professional SATA HDD duplicator, specially designed for high volume duplication. U-Reach adopted a unique multitasking technology that can simultaneously copy up to 25 targets with a high transfer speed of 18 GB per minute. We guarantee the highest productivity without speed degradation, even as the number of targets increase. Features : Operation type : stand-alone, FPGA-based operation (NON PC-based system design) Bandwidth performance : speed transfers of up 18.0GB/min. (300MB/sec.) . Dedicated bandwidth enables high-volume replications without speed degradation. Modular cabling design : modular-designed ports effectively reduce downtime and is cost-effective for long-term ownership. Controller Design : embedded controller is designed to support capacities over 18TB+. constant improvement supports latest market available devices. Read only source port : there is no option to disable this built-in feature and it is integrated with all U-reach duplicators Real-time PC monitoring : view live status for : writing/reading speed, total capacity, current function progress per port. Event Log Management Records : operating durations, individual port copy progressions, connected device models, capacities, serial numbers, and PASS or FAIL results. Device writing/reading speeds are recorded Log report files are generated through port#1 or through the U-reach PC link software utility. Bandwidth Performance 18.0GB/min *Actual performance is dependent on device transfer speeds* Supported Formats Quick Copy (System and Files): FAT16/32/64, Windows (NTFS), Linux(Ext2/Ext3/Ext4), and Mac(HFS/HFS+/HFSX) Whole Device Copy: All formats, including proprietary formats. GPT, MBR, and Advanced Formats Supported Capacity Over 18TB+. Supported OS All (Windows, Mac, Linux, and other proprietary systems) Operation Mode Standalone, FPGA-based Operation Language English, Japan Copy Modes Quick Copy (System and Files) / All Partitions / Whole Device / Percentage Copy Compare (Verification) Bit-by-bit data comparison from the source device to target device(s). Sanitization Modes Quick Erase, Full Erase (NIST 800-88 ), DoD Erase (DoD 5220.22-M), 7-Pass Erase (DoD 5220.22-M(ECE)), Secure Erase (NIST 800-88) , Enhanced Secure Erase. Skip Bad Sectors Skip the number of bad sectors during Copy/Compare/Erase. Minimum Speed Disable or set minimum threshold speed to drop the slowest device. HPA Copy Modes Allows user to choose various HPA replication methods. Clear HPA at Erase Keep or clear HPA settings during sanitization process Log Manager Manage and export log reports. Others Copy/Skip Unknow Format, Erase Source Port, Transfer Modes, Device Power-up/down Time. Compatible Device 1.8/2.5/3.5 SATA HDD and SSDs. DD and SSDs. Devices Require Optional Cables or Adapters IDE, mSATA, microSATA, eSATA, M.2(NGFF), CFast, SATA DOM LCD Display 2x20 Backlit Monochrome LCD Display LEDs 3 LED Indicators per Port: Yellow (Power), Green (Pass), Red (Fail) Control Panel 4 Push Buttons (, , OK, ESC) Power Requirements Universal Power: 115V AC or 230V AC, 50/60Hz Temperature Working: 0C ~ 60C Storage: -20C ~ 85C Humidity Working: 20% ~ 80% Storage: 5% ~ 95% Certifications FCC, CE, RoHS, and Reach
SAS HDD/SSD Eraser-TP800-SAS CALL FOR PRICE
1 to 3 Sata Duplication with interface to print -- SAS HDD/SSD Eraser-TP800-SAS Function & Features Operation: Stand-alone, FPGA-based operation (Non PC-based) 5 Sanitization Modes: Quick Erase, Full Erase, DoD Erase, DoD7 Erase, and Secure Erase. Erase Confirmation: 1) Supports real-time print proof through RS232. 2) IPM (Invisible-Proof Mark) Technology: - Any falsification can be detected to ensure the report is genuine 3) Log report can be exported to a USB device. Fast key (GO) can perform asynchronous HDD erase of each port. Read-Only Source Port: There are no options to disable this built-in feature and it is integrated with all U-Reach duplicators. 4 Copy Modes: Quick copy (Data & System): Supports Windows, Mac, and Linux. All Partitions: Users can skip HPA or unknown partitions. Whole HDD: Bit-by-bit copy mode which copies exactly like the master device. Percentage Copy: Users can set percentages of capacity to be copied. Compatibilities Embedded controller is designed to support capacities over 18TB+. Constant improvement supports latest market-available devices. Supports all brands of HDDs and SSDs. Supports GPT, MBR, and Advanced Formats. Supports 1.8/2.5/3.5 SATA/SAS HDDs and SSDs without adapter. Supports mSATA, microSATA and M.2 (Requires adapters). Special Features Customized Settings: Allow users to set hard drive motor start and stop time. Event Log Management: Records: operating durations, individual port copy progressions, connected hard drive models, capacities, serial numbers, and PASS or FAIL results. Log report files are generated through the USB port and are saved to USB devices. Reports can be printed through a RS232. Hardware Design The Fast Key (GO button) allow users to perform asynchronous erase for each port. Hold (Go button) to stop erasing process. Model SAS/SATA Eraser TP800-SAS Target/Port 4-port synchronous erase, 1 to 3 duplication(SATA only) Buffers 128MB Maximum Transfer Speed 18GB/min. (300MB/sec.) *(Actual performance is dependent on HDD transfer speeds.) Supported copy Formats Copy Modes: All Partitions/Whole HDD/Percentage copies all types of formats, both known, and unknown. Quick Copy: FAT16/32/64, Windows (NTFS), Mac (HFS/HFS+/HFSX), and Linux (Ext2/3/4). Operating Type Stand alone operation Language Support English LCD Display Monochrome LCD display LEDs LED (Red/Green) on each slot Control Panel 5 Push Buttons: (up), (down), OK (confirm/enter), ESC(exit/cancel), GO(Asynchronous erase) Sanitization Modes Sanitization Modes Quick Erase, Full Erase, DoD Erase, Secure Erase, 7 Full Erase Copy Modes (SATA HDD only) Quick Copy, All Partitions Copy, Whole HDD Copy, and Percentage Copy File system Supported All (Windows, Linux, and other stand-alone systems) Compatible Interfaces w/o Adapters : 1.8"/2.5"/3.5 SATA/SAS (require SATA II supported HDD/SSD devices) w/ Adapters: mSATA , MicroSD and M.2 Power Power consumption: 60W Power supply: Adjustable voltage 100V-240V, 50/60Hz. Temperature Operation: 5C ~ 45C, Storage: -20C ~ 85C Humidity Operation: 20% ~ 80%, Storage: 5% ~ 95% Certification FCCCERoHS

FREE Delivery in UAE

Including Dubai, Abu Dhabi and Sharjah

NAS Experts

QNAP , Synology Top Sub Distributor and Service Partners in UAE

TOP Integrator

Second time Winner of GEC Awards in Data Storage Category UAE

Honest and Credible

4.8+ Star Google rating. Thousands of satisfied customers in UAE