SAS HDD/SSD Eraser-TP800-SAS

All Pictures shown are for illustration purpose only.Actual product may vary in color,shape, size or otherwise

Brand: Ureach SKU: TP800SAS

Product Information from Vendor

1 to 3 Sata Duplication with interface to print

SAS HDD/SSD Eraser-TP800-SAS

Function & Features Operation:

Stand-alone, FPGA-based operation (Non PC-based)

5 Sanitization Modes: Quick Erase, Full Erase, DoD Erase, DoD7 Erase, and Secure Erase.

Erase Confirmation:

1) Supports real-time print proof through RS232.
2) IPM (Invisible-Proof Mark) Technology:
- Any falsification can be detected to ensure the report is genuine
3) Log report can be exported to a USB device.

Fast key (GO) can perform asynchronous HDD erase of each port. Read-Only Source Port: There are no options to disable this built-in feature and it is integrated with all U-Reach duplicators.

4 Copy Modes:

Quick copy (Data & System): Supports Windows, Mac, and Linux.
All Partitions: Users can skip HPA or unknown partitions.
Whole HDD: Bit-by-bit copy mode which copies exactly like the master device.
Percentage Copy: Users can set percentages of capacity to be copied.

Compatibilities

Embedded controller is designed to support capacities over 18TB+. Constant improvement supports latest market-available devices.

Supports all brands of HDDs and SSDs.
Supports GPT, MBR, and Advanced Formats.
Supports 1.8/2.5/3.5 SATA/SAS HDDs and SSDs without adapter.
Supports mSATA, microSATA and M.2 (Requires adapters).

Special Features

Customized Settings: Allow users to set hard drive motor start and stop time.

Event Log Management:

Records: operating durations, individual port copy progressions, connected hard drive models, capacities, serial numbers, and PASS or FAIL results.
Log report files are generated through the USB port and are saved to USB devices.
Reports can be printed through a RS232.

Hardware Design

The Fast Key (GO button) allow users to perform asynchronous erase for each port.
Hold (Go button) to stop erasing process.

Model	SAS/SATA Eraser TP800-SAS
Target/Port	4-port synchronous erase, 1 to 3 duplication(SATA only)
Buffers	128MB
Maximum Transfer Speed	18GB/min. (300MB/sec.) *(Actual performance is dependent on HDD transfer speeds.)
Supported copy Formats	Copy Modes: All Partitions/Whole HDD/Percentage copies all types of formats, both known, and unknown. Quick Copy: FAT16/32/64, Windows (NTFS), Mac (HFS/HFS+/HFSX), and Linux (Ext2/3/4).
Operating Type	Stand alone operation
Language Support	English
LCD Display	Monochrome LCD display
LEDs	LED (Red/Green) on each slot
Control Panel	5 Push Buttons: (up), (down), OK (confirm/enter), ESC(exit/cancel), GO(Asynchronous erase)
Sanitization Modes	Sanitization Modes Quick Erase, Full Erase, DoD Erase, Secure Erase, 7 Full Erase
Copy Modes (SATA HDD only)	Quick Copy, All Partitions Copy, Whole HDD Copy, and Percentage Copy
File system Supported	All (Windows, Linux, and other stand-alone systems)
Compatible Interfaces	w/o Adapters : 1.8"/2.5"/3.5 SATA/SAS (require SATA II supported HDD/SSD devices) w/ Adapters: mSATA , MicroSD and M.2
Power	Power consumption: 60W Power supply: Adjustable voltage 100V-240V, 50/60Hz.
Temperature	Operation: 5C ~ 45C, Storage: -20C ~ 85C
Humidity	Operation: 20% ~ 80%, Storage: 5% ~ 95%
Certification	FCCCERoHS

SAS HDD/SSD Eraser-TP800-SAS

SAS HDD/SSD Eraser-TP800-SAS

Subscribe to Our Newsletter

About Us

Contact Details

Our Location

Contact a Seller

Product Information from Vendor

SAS HDD/SSD Eraser-TP800-SAS